A1 Cardone 4C-3004 HVAC Control Module in Canada

Buyer fitment guide only intended as reference. Please use catalogue search by vehicle to ensure proper fitment.

Dodge 55055905AA
Dodge 55055905AD
Dodge 55055905AE
Dodge 55055905AF
Dodge 55056246AA
Dodge 55056246AB
Dodge 55056246AC
Dodge 55056246AD
Dodge 55056321AA
Dodge 55056321AB
Dodge 55056321AC
Dodge 55056321AD
Dodge 55056321AE

As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
100% functional testing delivers guaranteed performance and reliability.
100% of the backlight bulbs are replaced.
Electronic repair components are upgraded to meet or exceed the O.E. design.
Unit face is restored to O.E. appearance and functionality.
One obvious indicator of a vehicle€™s age is the condition of the climate control module. Lenses often get scratched or cracked, bulbs burn out, internal electronics fail, faceplate paint and indicator buttons fade, and control knobs break off. These symptoms make reading the controls difficult and changing settings impossible. C ARDONE Remanufactured Climate Control Modules are direct-fit units that fully restore O.E. functionality and erase the years of wear from this critical interior part.

Package Contents	Climate Control Module; Instruction Sheet
Product Condition	Remanufactured
E-Waste	Yes
Prop 65	No
SDS Required	No
Contains Electronic Components?	Circuit Board
Is item a chemical?	No
Is or contains a battery?	No
Is or contains a bulb?	No
Is the item CARB affected?	No
FAQ_Q1	I replaced my Climate Control Module and now I'm getting reduced air flow from the HVAC dashboard vents. What could be causing this problem?
FAA_A1	The reduced air flow problem may be due to a Climate Control Module installed without performing the HVAC System actuator recalibration process.
FAQ_Q2	The A/C button flashes on my manual Climate Control Module when the A/C system is activated. The blinking indicator turns into a solid light after cycling the A/C button or ignition key. What could be the causing this problem?
FAA_A2	This condition may be caused by a low battery state of charge on a previous ignition key cycle.Â Check the battery state of charge.
FAQ_Q3	The blower only works on one or a few of the speeds. What could be causing this problem?
FAA_A3	This condition may be caused by a problem with the Blower Motor Control Resistor or Blower Motor Control Processor as equipped. Note, a vehicle with a Manual Climate Control Module will have a Blower Motor Control Resistor as part of the HVAC system design. A vehicle with an Automatic Climate Control Module will have a Blower Motor Control Processor as part of the HVAC system design.
FAQ_Q4	I have an automatic temperature control HVAC system and my blower motor is inoperative or continues to run after the vehicle has been shut off. What could be causing this problem?
FAA_A4	This problem may be caused by a blower motor control module failure.
FAQ_Q5	Air is coming out of a location that I did not select on the HVAC head unit.
FAA_A5	This can be caused by multiple issues. There are multiple parts in the HVAC control system, and they should be inspected before replacing parts. Some vehicles have common failures, check those points first.
UPC	00884548269972
Origin Country:	US
Weight:	1.1Lb. (0.5 kg.)
Package Dimensions:	9.8" x 7.4" x 3.3" (24.8 cm x 18.7 cm x 8.3 cm)

1 Year Warranty

A1 Cardone 4C-3004 HVAC Control Module

Remanufactured Climate Control Module