A1 Cardone 1G-1810 Rack and Pinion Assembly
Remanufactured Rack and Pinion Assembly
$286.89 CAD
Core charge: $29.70
Out of Stock
Brand: A1 Cardone
Stock #: 1G1810
Condition: Remanufactured
Made in USA
UPC: 00884548285361
Weight: 12.06 lb.(5.48 kg.)
Dimensions: 48.8" x 10.3" x 6.5" (123.8 cm x 26 cm x 16.5 cm)
Accepted Payments: Visa, MasterCard, PayPal
Buyer fitment guide only intended as reference. Please use catalogue search by vehicle to ensure proper fitment.
- ACDelco 45D1084
- ACDelco 46D1084A
- Mcquay-Norris FA4117
- Mcquay-Norris FA4117E
- OEM Part Number MCSOE29
- OEM Part Number 6L1Z3085BR
- OEM Part Number 6L3Z3085AL
- OEM Part Number 7L1Z3085A
- OEM Part Number 9L3Z3085A
- OEM Part Number EL3Z3085A
- OEM Part Number EL3Z3085B
- OEM Part Number FL3Z3085A
- OEM Part Number FL3Z3085B
- OEM Part Number MCF2385
- OEM Part Number 4L3Z3085AA
- OEM Part Number 4L3Z3085AB
- OEM Part Number JL1Z 3085-A
- Chevrolet 15216791
- Chevrolet 15277887
- Chevrolet 15858369
- Chevrolet 19303499
- Chevrolet 21998461
- Chevrolet 22687087
- Chevrolet 25902150
- Chevrolet 25978193
- Saturn 15858368
- Saturn 15858369
- Saturn 25902150
- Pontiac 15216791
- Pontiac 15277887
- Pontiac 15825627
- Pontiac 15858369
- Pontiac 21998461
- Pontiac 25902150
- Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE€™s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- Finished in protective coating to prevent corrosion and rust.
| Input Shaft Type | Grooved |
| Product Condition | Remanufactured |
| Package Contents | Rack and Pinion; Instruction Sheet |
| E-Waste | No |
| Prop 65 | No |
| SDS Required | No |
| Contains Electronic Components? | No |
| Is item a chemical? | No |
| Is or contains a battery? | No |
| Is or contains a bulb? | No |
| Is the item CARB affected? | No |
| FAQ_Q1 | What do you replace on the rack? |
| FAA_A1 | Rubber seals, dust boots, wear items, lubricant(s), clamps and bearings are replaced 100%. Dampers, lock washers and drive belts are replaced where applicable. |
| FAQ_Q2 | Are the racks the same design as my original? |
| FAA_A2 | Yes, all units produced are verified to function to O.E. design specifications. Potential O.E. failure modes are evaluated and validated improvements are made. |
| FAQ_Q3 | Are there any precautions before I install? |
| FAA_A3 | Yes, the steering wheel must be held in a straight-ahead position using a suitable tool to prevent rotation while the intermediate shaft is disconnected from the rack and pinion. Failure to do so can result in damage to the clock spring within the steering column. If rotation of the intermediate shaft is suspected, the clock spring must be removed and re-centered. |
| FAQ_Q4 | Do I have to do any type of relearn after installation? |
| FAA_A4 | Yes, these systems are equipped with torque angle sensors in the steering column that need to be recalibrated after installation of the replacement rack and pinion. |
| FAQ_Q5 | Can I install one of your racks on my custom or classic vehicle? |
| FAA_A5 | Not recommended; radical modifications would be needed for installation of a modern electronic steering rack and pinion on a vehicle other than the O.E .Manufacturer intended application. |
| UPC | 00884548285361 |
| Origin Country: | US |
| Weight: | 12.06Lb. (5.48 kg.) |
| Package Dimensions: | 48.8" x 10.3" x 6.5" (123.8 cm x 26 cm x 16.5 cm) |
1 Year Warranty