2006 Volkswagen Passat Rack and Pinion Assemblies
Save up to 40% on original replacement 2006 Volkswagen Passat Rack and Pinion Assemblies. Navigate our online catalogue to find Rack and Pinion Assemblies and other parts designed specifically to fit a 2006 Volkswagen Passat.
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Vehicle Fitment Notes:
with Module # 1K1 909 144j To Chassis # 3C-6-050 000 Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
with Module # 1K1 909 144j To Chassis # 3C-6-050 000 Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Vehicle Fitment Notes:
with Module # 1K1 909 144j To Chassis # 3C-6-050 000 Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
with Module # 1K1 909 144j To Chassis # 3C-6-050 000 Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Vehicle Fitment Notes:
with Module # 1K1 909 144k From Chassis # 3C-6-050 001 Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
with Module # 1K1 909 144k From Chassis # 3C-6-050 001 Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Vehicle Fitment Notes:
with Module # 1K1 909 144k From Chassis # 3C-6-050 001 Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
with Module # 1K1 909 144k From Chassis # 3C-6-050 001 Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 3.6L 3597cc 219ci V6 (3.50x3.80; 89.0x96.4);
Engine Base: 3.6L 3597cc 219ci V6 (3.50x3.80; 89.0x96.4);
Vehicle Fitment Notes:
with Module # 1K1 909 144k Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
with Module # 1K1 909 144k Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 3.6L 3597cc 219ci V6 (3.50x3.80; 89.0x96.4);
Engine Base: 3.6L 3597cc 219ci V6 (3.50x3.80; 89.0x96.4);
Vehicle Fitment Notes:
with Module # 1K1 909 144k Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
with Module # 1K1 909 144k Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Vehicle Fitment Notes:
with Module # 1K1 909 144L From Chassis # 3C-6-050 001 Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
with Module # 1K1 909 144L From Chassis # 3C-6-050 001 Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Vehicle Fitment Notes:
with Module # 1K1 909 144L From Chassis # 3C-6-050 001 Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
with Module # 1K1 909 144L From Chassis # 3C-6-050 001 Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 3.6L 3597cc 219ci V6 (3.50x3.80; 89.0x96.4);
Engine Base: 3.6L 3597cc 219ci V6 (3.50x3.80; 89.0x96.4);
Vehicle Fitment Notes:
with Module # 1K1 909 144L Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
with Module # 1K1 909 144L Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 3.6L 3597cc 219ci V6 (3.50x3.80; 89.0x96.4);
Engine Base: 3.6L 3597cc 219ci V6 (3.50x3.80; 89.0x96.4);
Vehicle Fitment Notes:
with Module # 1K1 909 144L Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
with Module # 1K1 909 144L Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Vehicle Fitment Notes:
with Module # 1K1 909 144M From Chassis # 3C-6-050 001 Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
with Module # 1K1 909 144M From Chassis # 3C-6-050 001 Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Vehicle Fitment Notes:
with Module # 1K1 909 144M From Chassis # 3C-6-050 001 Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
with Module # 1K1 909 144M From Chassis # 3C-6-050 001 Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 3.6L 3597cc 219ci V6 (3.50x3.80; 89.0x96.4);
Engine Base: 3.6L 3597cc 219ci V6 (3.50x3.80; 89.0x96.4);
Vehicle Fitment Notes:
with Module # 1K1 909 144M Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
with Module # 1K1 909 144M Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 3.6L 3597cc 219ci V6 (3.50x3.80; 89.0x96.4);
Engine Base: 3.6L 3597cc 219ci V6 (3.50x3.80; 89.0x96.4);
Vehicle Fitment Notes:
with Module # 1K1 909 144M Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
with Module # 1K1 909 144M Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Vehicle Fitment Notes:
with Module # 1K1 909 144k To Chassis # 3C-6-050 000 Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
with Module # 1K1 909 144k To Chassis # 3C-6-050 000 Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Vehicle Fitment Notes:
with Module # 1K1 909 144k To Chassis # 3C-6-050 000 Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
with Module # 1K1 909 144k To Chassis # 3C-6-050 000 Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist