1998 Ford Contour Engine Control Modules
Save up to 40% on original replacement 1998 Ford Contour Engine Control Modules. Navigate our online catalogue to find Engine Control Modules and other parts designed specifically to fit a 1998 Ford Contour.
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Vehicle Fitment Notes:
ID #(s) 97BB-CA,CC,CD, 97BB-EA This Unit is Pre-Programmed at the Factory with Calibration # 8-04A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) 97BB-CA,CC,CD, 97BB-EA This Unit is Pre-Programmed at the Factory with Calibration # 8-04A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Vehicle Fitment Notes:
with Calibration # 8-04A ID #(s) 97BB-CA,CC,CD, 97BB-EA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-04A ID #(s) 97BB-CA,CC,CD, 97BB-EA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
ID #(s) 97BB-DA,DB,DC,DD This Unit is Pre-Programmed at the Factory with Calibration # 8-04P with California Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) 97BB-DA,DB,DC,DD This Unit is Pre-Programmed at the Factory with Calibration # 8-04P with California Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with California Emissions System with Calibration # 8-04P ID #(s) 97BB-DA,DB,DC,DD Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with California Emissions System with Calibration # 8-04P ID #(s) 97BB-DA,DB,DC,DD Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
ID #(s) 97BB-WA,WB,WC,WD,WE,BJA, DLA This Unit is Pre-Programmed at the Factory with Calibration # 8-12B Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) 97BB-WA,WB,WC,WD,WE,BJA, DLA This Unit is Pre-Programmed at the Factory with Calibration # 8-12B Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
with Calibration # 8-12B ID #(s) 97BB-WA,WB,WC,WD,WE,BJA, DLA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-12B ID #(s) 97BB-WA,WB,WC,WD,WE,BJA, DLA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
ID #(s) 97BB-XA,XB,XC,XD,BKA,DMA This Unit is Pre-Programmed at the Factory with Calibration # 8-12T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) 97BB-XA,XB,XC,XD,BKA,DMA This Unit is Pre-Programmed at the Factory with Calibration # 8-12T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
with Calibration # 8-12T ID #(s) 97BB-XA,XB,XC,XD,BKA,DMA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-12T ID #(s) 97BB-XA,XB,XC,XD,BKA,DMA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
ID #(s) 97BB-BGA This Unit is Pre-Programmed at the Factory with Calibration # 8-04A with Federal Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) 97BB-BGA This Unit is Pre-Programmed at the Factory with Calibration # 8-04A with Federal Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with Federal Emissions System with Calibration # 8-04A ID #(s) 97BB-BGA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Federal Emissions System with Calibration # 8-04A ID #(s) 97BB-BGA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
ID #(s) 97BB-BHA This Unit is Pre-Programmed at the Factory with Calibration # 8-04P with California Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) 97BB-BHA This Unit is Pre-Programmed at the Factory with Calibration # 8-04P with California Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with California Emissions System with Calibration # 8-04P ID #(s) 97BB-BHA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with California Emissions System with Calibration # 8-04P ID #(s) 97BB-BHA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
ID #(s) 97BB-DPA This Unit is Pre-Programmed at the Factory with Calibration # 8-12B Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) 97BB-DPA This Unit is Pre-Programmed at the Factory with Calibration # 8-12B Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
with Calibration # 8-12B ID #(s) 97BB-DPA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-12B ID #(s) 97BB-DPA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
ID #(s) 97BB-DRA This Unit is Pre-Programmed at the Factory with Calibration # 8-12T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) 97BB-DRA This Unit is Pre-Programmed at the Factory with Calibration # 8-12T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
with Calibration # 8-12T ID #(s) 97BB-DRA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-12T ID #(s) 97BB-DRA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Vehicle Fitment Notes:
ID #(s) 98BB-AXD,AXE,AXF,AXG This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-AA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) 98BB-AXD,AXE,AXF,AXG This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-AA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Vehicle Fitment Notes:
with Calibration # 9EQA-AA ID #(s) 98BB-AXD,AXE,AXF,AXG Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 9EQA-AA ID #(s) 98BB-AXD,AXE,AXF,AXG Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Vehicle Fitment Notes:
ID #(s) F8PF-AMA,AMB,AMC This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-AM Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F8PF-AMA,AMB,AMC This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-AM Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Vehicle Fitment Notes:
with Calibration # 9EQA-AM ID #(s) F8PF-AMA,AMB,AMC Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 9EQA-AM ID #(s) F8PF-AMA,AMB,AMC Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
ID #(s) 98BB-BXA This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-AA with Federal Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) 98BB-BXA This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-AA with Federal Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with Federal Emissions System with Calibration # 9EQA-AA ID #(s) 98BB-BXA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Federal Emissions System with Calibration # 9EQA-AA ID #(s) 98BB-BXA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Vehicle Fitment Notes:
ID #(s) F8PF-ATA,ATB This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-AR Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F8PF-ATA,ATB This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-AR Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Vehicle Fitment Notes:
with Calibration # 9EQA-AR ID #(s) F8PF-ATA,ATB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 9EQA-AR ID #(s) F8PF-ATA,ATB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Manual;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Manual;
Vehicle Fitment Notes:
ID #(s) 98BB-AYA,AYB,AYD,AYE,AYF,AYG This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-BA with California Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) 98BB-AYA,AYB,AYD,AYE,AYF,AYG This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-BA with California Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Manual;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Manual;
Vehicle Fitment Notes:
with California Emissions System with Calibration # 9EQA-BA ID #(s) 98BB-AYA,AYB,AYD,AYE,AYF,AYG Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with California Emissions System with Calibration # 9EQA-BA ID #(s) 98BB-AYA,AYB,AYD,AYE,AYF,AYG Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Vehicle Fitment Notes:
ID #(s) F8PF-ANA,ANB,ANC This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-BN Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F8PF-ANA,ANB,ANC This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-BN Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Vehicle Fitment Notes:
with Calibration # 9EQA-BN ID #(s) F8PF-ANA,ANB,ANC Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 9EQA-BN ID #(s) F8PF-ANA,ANB,ANC Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
ID #(s) 98BB-BYA,BYB This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-BA with California Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) 98BB-BYA,BYB This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-BA with California Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with California Emissions System with Calibration # 9EQA-BA ID #(s) 98BB-BYA,BYB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with California Emissions System with Calibration # 9EQA-BA ID #(s) 98BB-BYA,BYB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Vehicle Fitment Notes:
ID #(s) F8PF-AUA,AUB This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-BR Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F8PF-AUA,AUB This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-BR Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Vehicle Fitment Notes:
with Calibration # 9EQA-BR ID #(s) F8PF-AUA,AUB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 9EQA-BR ID #(s) F8PF-AUA,AUB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Manual;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Manual;
Vehicle Fitment Notes:
ID #(s) 98BB-AUA,AUB,AUC,AUD,AUE This Unit is Pre-Programmed at the Factory with Calibration # 9EQM-AA with Federal Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) 98BB-AUA,AUB,AUC,AUD,AUE This Unit is Pre-Programmed at the Factory with Calibration # 9EQM-AA with Federal Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Manual;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Manual;
Vehicle Fitment Notes:
with Federal Emissions System with Calibration # 9EQM-AA ID #(s) 98BB-AUA,AUB,AUC,AUD,AUE Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Federal Emissions System with Calibration # 9EQM-AA ID #(s) 98BB-AUA,AUB,AUC,AUD,AUE Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Manual;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Manual;
Vehicle Fitment Notes:
ID #(s) 98BB-AVA,AVB,AVC,AVD,AVE This Unit is Pre-Programmed at the Factory with Calibration # 9EQM-BA with California Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) 98BB-AVA,AVB,AVC,AVD,AVE This Unit is Pre-Programmed at the Factory with Calibration # 9EQM-BA with California Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Manual;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Manual;
Vehicle Fitment Notes:
with California Emissions System with Calibration # 9EQM-BA ID #(s) 98BB-AVA,AVB,AVC,AVD,AVE Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with California Emissions System with Calibration # 9EQM-BA ID #(s) 98BB-AVA,AVB,AVC,AVD,AVE Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-411 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-411 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-411 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-411 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-413 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-413 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-413 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-413 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-416 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-416 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-416 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-416 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
All Calibrations with Module ID MLP-421 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
All Calibrations with Module ID MLP-421 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID MLP-421 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Correct VIN and OE Number required when ordering All Calibrations with Module ID MLP-421 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
All Calibrations with Module ID MLF-4G1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MLF-4G1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MLF-4G1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MLF-4G1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
All Calibrations with Module ID MLF-4G2 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MLF-4G2 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MLF-4G2 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MLF-4G2 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
ID #(s) 98BB-BMB,98BB-CSA This Unit is Pre-Programmed at the Factory with Calibration # 8-04A with Federal Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) 98BB-BMB,98BB-CSA This Unit is Pre-Programmed at the Factory with Calibration # 8-04A with Federal Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with Federal Emissions System with Calibration # 8-04A ID #(s) 98BB-BMB,98BB-CSA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Federal Emissions System with Calibration # 8-04A ID #(s) 98BB-BMB,98BB-CSA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Vehicle Fitment Notes:
ID #(s) F8PF-AKB This Unit is Pre-Programmed at the Factory with Calibration # 8-04G Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F8PF-AKB This Unit is Pre-Programmed at the Factory with Calibration # 8-04G Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Vehicle Fitment Notes:
with Calibration # 8-04G ID #(s) F8PF-AKB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-04G ID #(s) F8PF-AKB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Vehicle Fitment Notes:
ID #(s) F8PF-ALB This Unit is Pre-Programmed at the Factory with Calibration # 8-04N Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F8PF-ALB This Unit is Pre-Programmed at the Factory with Calibration # 8-04N Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: Z;
Vehicle Fitment Notes:
with Calibration # 8-04N ID #(s) F8PF-ALB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-04N ID #(s) F8PF-ALB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
ID #(s) 98BB-CTA This Unit is Pre-Programmed at the Factory with Calibration # 8-04P with California Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) 98BB-CTA This Unit is Pre-Programmed at the Factory with Calibration # 8-04P with California Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0); Engine VIN: 3; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with California Emissions System with Calibration # 8-04P ID #(s) 98BB-CTA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with California Emissions System with Calibration # 8-04P ID #(s) 98BB-CTA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-412 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-412 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-412 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-412 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-4H2 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-4H2 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-4H2 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-4H2 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
All Calibrations with Module ID MLP-422 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
All Calibrations with Module ID MLP-422 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID MLP-422 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Correct VIN and OE Number required when ordering All Calibrations with Module ID MLP-422 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues